Hopp til hovedinnhold

Enkel lesing / visning av et stort antall rader og kolonner i Excel

Forfatter: Xiaoyang Sist endret: 2023-08-16

Kutools for Excel

Øker Excel med 300+
Kraftige funksjoner

Hvis du jobber med at regnearket inneholder enorme data med hundrevis av rader og kolonner, kan du lett få puslespill mens du sjekker og hopper dataene fra den ene til den andre, noe som vil kaste bort tid. For å løse dette problemet fremhever Grid Focus-verktøyet til Kutools for Excel raden og kolonnen på tvers for å gjøre den aktive cellen eller området enestående som skjermbildet nedenfor. Demo

skuddlesingsoppsett 2


Aktiver Grid Focus-verktøyet

Klikk Kutools > Rutenettfokus for å aktivere dette verktøyet, mens Grid Focus er aktivert, er fanen uthevet.
skuddlesingsoppsett 2


Rutenettfokusinnstillinger

Hvis du vil endre innstillingene som former, stiler, farger eller gjennomsiktighet, kan du gå til Rutenettfokusinnstillings dialog for å endre.

Klikk Kutools fanen, og gå til klikk på pilen ved siden av Rutenettfokus for å utvide rullegardinmenyen, og klikk deretter Rutenettfokusinnstillinger.
skuddlesingsoppsett 2

Rutenettfokusinnstillinger dialog, kan du endre former, stiler, farger og gjennomsiktighet etter behov, samtidig kan du forhåndsvise endringen i Forhåndsvisning før du tar i bruk endringene.
skuddlesingsoppsett 2

Om oss Fremhev området for aktiv celle og Marker området ved redigering av celle alternativer.

Tick Fremhev området for aktiv celle alternativet, vil den aktive cellen eller området utheves.

skuddlesingsoppsett 2

Fjern krysset Fremhev området for aktiv celle alternativet, men kryss av for Marker området ved redigering av celle alternativet, vil den aktive cellen eller området ikke utheves, men det overfylte området er uthevet.

skuddlesingsoppsett 2

Fjern merket for begge Fremhev området for aktiv celle og Marker området ved redigering av celle alternativer, vil både den aktive cellen eller området og det overfylte området ikke utheves.

skuddlesingsoppsett 2

Aktiver Grid Focus: kryss av for dette alternativet etter innstillinger og klikk OK, vil Grid Focus bli automatisk aktivert.

Standardinnstillinger: klikk på denne knappen, innstillingene for Grid Focus er gjenopprettet til standardinnstillingene for Kutools.


Merknader:

1. Du kan avbryte dette verktøyet ved å klikke på Rutenettfokus kommandoen endres fanen til lysegrå.

2. Hvis du åpner flere Excel-filer, dette Rutenettfokus funksjonen brukes på dem alle.

3. Dette Rutenettfokus vil ikke aktiveres automatisk når du starter arbeidsboken neste gang.

Grid Focus Demo


Kutools for Excel: Over 300 praktiske verktøy for hånden! Start din 30-dagers gratis prøveperiode uten funksjonsbegrensninger i dag. Last ned nå!

    Produktivitetsverktøy anbefales
    Følgende verktøy kan spare mye tid og penger, hvilket er riktig for deg?
    Office-fanen: Bruke praktiske faner på kontoret, som Chrome, Firefox og New Internet Explorer.
    Kutools for Excel: Mer enn 300 avanserte funksjoner for Excel 2021, 2019, 2016, 2013, 2010, 2007 og Office 365.

    Kutools for Excel

    Funksjonen beskrevet ovenfor er bare en av 300 kraftige funksjoner i Kutools for Excel.

    Designet for Excel(Office) 2021, 2019, 2016, 2013, 2010, 2007 og Office 365. Gratis nedlasting og bruk i 30 dager.

    Skjermbilde av Kutools for Excel

    btn les mer      btn nedlasting     btn kjøp

Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Why doesn't it open automatically at startup? it would be nice to remember the last setting
This comment was minimized by the moderator on the site
Hello, Mennan,
Sorry for the inconvenience, for the stability of the function, our feature is disabled when opening next time at present, but the last setting and operation can be remembered.
Thanks for your comment.
This comment was minimized by the moderator on the site
I have a problem with the reading layout. Every time when I start it, it behaves strangely. It "chose" a smaller size of the sheet than it is actually on my screen and it works in that sheet. Eg: if I see on my screen columns range from A up to AC and rows range from 1 up to 39, the reading layout chooses that my columns range from A up to half of X and rows range from 1 up to half of 32 and works in that let's call it window.
I tried to uninstall kutools and install it again, but the same problem remains.
Any wise advice would be appreciated from my side.
I am running MS office professional plus 2021.

Thanks in advance
This comment was minimized by the moderator on the site
I might detected the problem. I am running 3 displays, one from a laptop 15,6" and two others 24" over wavlink dock. All three displays are running at a resolution of 1920 x 1080. My main display is from the laptop.
I am using excel on another two 24" displays just because they have a bigger screen. When I put excel on the laptop window reading layout behaves as it should, and that is the exact size of the sheet that I previously described as a smaller window.
This comment was minimized by the moderator on the site
Hello, Dejan,
Thanks for your comment.
I have fed back this problem to the developers, if there is a an upgrade or fixed, we will let you know in the first time.
This comment was minimized by the moderator on the site
If you make this auto load when opening excel I will buy this product. :D
This comment was minimized by the moderator on the site
Hi, Andrei

Thanks for your comment, your suggestion has been fed back to the developers, if there's an upgrade, I'll let you know in the first time. 😄
This comment was minimized by the moderator on the site
Very Good Service Nice blog
This comment was minimized by the moderator on the site
Hello, Thanks for sharing this informative blog with us.
This comment was minimized by the moderator on the site
This feature is great. Bear in mind I had an existing Excel file where this button was ALWAYS disabled. I had to copy-and-paste the data out of the file and save it into a new file to get the "Reading Layout" button to enable. It then worked fine.
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.🙂
This comment was minimized by the moderator on the site
se eu compra a licença consigo instalar mais de uma vez no pc ou só serve uma vez ?
This comment was minimized by the moderator on the site
This solved one of my biggest headaches. I have one program that outputs a report that when exported to Excell it creates 200 worksheets! I have never been able to use it until now. Merging all of them into one worksheet only takes a few minutes with Kutools.
This comment was minimized by the moderator on the site
Thanks A lot of this product, mainly its use for reading layout & shortcuts of left side menu
This comment was minimized by the moderator on the site
My OS: Windows 7 Pro fully updated My Excel: 2010 My sheet: Range R1C6:R504C6 is in use PROBLEM: READING LAYOUT FAILS TO FILL ROW AND COLUMN SELECTED 1. Magnification: 60% 2. Rows 313-355 show 3. Cell R354:C6 selected 4. Column 5 fills to row 323. Row 354 no fill 5. Mag to 50% 6. Rows 311-357 show 7. Column 5 fills top to bottom. Row 354 fills left to right 8. Mag to 60%. Goto 4. 9. Mag to 70%. 10. Rows 319-354 show 11. Column 6 fills to row 325. Row 354 is empty. 12. Click R354:C6 13. No change! 14. WHY? NOTE: At 60% magnification selecting any cell on visible sheet on rows greater than 323 demonstrates same problem. Selecting row 323 or lower i.e R320 the function works as expected with row and column selected but only to row 323!
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations